Made from premium shrink-fit steel with full traceability.
C-ER Straight Shank Extension Arbor
Product Overview
Designed for deep-cavity machining and long-reach applications, providing stable tool extension, strong rigidity and reliable clamping performance.
Material: 40Cr High Carbon Steel
Surface Roughness: Ra < 0.005 mm
Hardness: HRC 48–50
Runout: < 0.01 mm
Product Description
Deep Cavity Machining
The extended body design helps bring cutting tools into deep cavities and hard-to-reach machining areas.
Strong Rigidity and Stability
The rigid structure helps reduce vibration and improve machining stability during long-reach cutting.
Center-Through Hole Design
The center through-hole design supports coolant flow and helps improve cooling performance during machining.
The through-hole is without internal thread.
Precision-Ground Construction
The outer diameter and key surfaces are precision ground to improve balance and support stable cutting performance.
High Clamping Strength
The nut-tightening structure provides strong clamping force and reliable tool holding.
Cost-Effective Tool Extension
Using an extension arbor can reduce the need for extra-long cutting tools and help lower tooling costs.
Product Parameters

| Model | L | L1 | L2 | D | d | C | T |
| C8-ER11A-100L | 116.6 | 100 | 16.6 | 19 | 11 | 8 | M5×0.8P |
| C8-ER11M-100L | 116.6 | 100 | 16.6 | 16 | 11 | 8 | M5×0.8P |
| C10-ER8M-100L | 115 | 100 | 15 | 12 | 11 | 10 | M6×1.0P |
| C10-ER8M-150L | 165 | 150 | 15 | 12 | 11 | 10 | M6×1.0P |
| C10-ER11A-100L | 116.6 | 100 | 16.6 | 19 | 11 | 10 | M6×1.0P |
| C10-ER11A-150L | 166.6 | 150 | 16.6 | 19 | 11 | 10 | M6×1.0P |
| C10-ER11M-100L | 116.6 | 100 | 16.6 | 16 | 11 | 10 | M6×1.0P |
| C10-ER11M-150L | 166.6 | 150 | 16.6 | 16 | 11 | 10 | M6×1.0P |
| C12-ER11A-100L | 116.6 | 100 | 16.6 | 19 | 11 | 12 | M8×1.25P |
| C12-ER11A-150L | 166.6 | 150 | 16.6 | 19 | 11 | 12 | M8×1.26P |
| C12-ER11M-100L | 116.6 | 100 | 16.6 | 16 | 11 | 12 | M8×1.27P |
| C12-ER11M-150L | 166.6 | 150 | 16.6 | 16 | 11 | 12 | M8×1.28P |
| C16-ER11A-100L | 116.6 | 100 | 16.6 | 19 | 11 | 16 | M10×1.5P |
| C16-ER11A-150L | 166.6 | 150 | 16.6 | 19 | 11 | 16 | M10×1.5P |
| C16-ER11M-100L | 116.6 | 100 | 16.6 | 16 | 11 | 16 | M10×1.5P |
| C16-ER11M-150L | 166.6 | 150 | 16.6 | 16 | 11 | 16 | M10×1.5P |
| C16-ER16A-100L | 140 | 100 | 40 | 28 | 16 | 16 | M10×1.5P |
| C16-ER16A-150L | 190 | 150 | 40 | 28 | 16 | 16 | M10×1.5P |
| C16-ER16A-200L | 240 | 200 | 40 | 28 | 16 | 16 | M10×1.5P |
| C16-ER16M-100L | 140 | 100 | 40 | 22 | 16 | 16 | M10×1.5P |
| C16-ER16M-150L | 190 | 150 | 40 | 22 | 16 | 16 | M10×1.5P |
| C16-ER16M-200L | 240 | 200 | 40 | 22 | 16 | 16 | M10×1.5P |
| C16-ER20A-100L | 140.5 | 100 | 40.5 | 34 | 20 | 16 | M10×1.5P |
| C16-ER20A-150L | 190.5 | 150 | 40.5 | 34 | 20 | 16 | M10×1.5P |
| C16-ER20M-100L | 140.5 | 100 | 40.5 | 28 | 20 | 16 | M10×1.5P |
| C16-ER20M-150L | 190.5 | 150 | 40.5 | 28 | 20 | 16 | M10×1.5P |
| Specification | Value |
| Product Type | Straight Shank Extension Arbor |
| Product Name | C-ER Straight Shank Extension Arbor |
| Material | 40Cr High Carbon Steel |
| Surface Roughness | Ra < 0.005 mm |
| Hardness | HRC 48–50 |
| Runout | < 0.01 mm |
Notes
A / M / UM indicate different nut types.
Please select the corresponding nut type according to the required appearance and matching configuration.
Certifications & Quality Assurance
Material Certification
Made from premium shrink-fit steel with full traceability.
Precision Testing
Every unit inspected using German Diebold taper gauges to ensure 7:24 taper compliance within AT3 tolerance.
Cryogenic Treatment
All holders undergo -196℃ultra-long cryogenic processing to convert retained austenite into martensite, enhancing wear resistance and reducing residual stress.
Dynamic Balancing
Each holder is dynamically balanced to G2.5@25,000 RPM standard, minimizing vibration at high speeds.
Full Inspection Protocol
100% outgoing inspection includes runout, hardness, and surface finish checks — no exceptions.
Applicable Materials & Industries
Compatible Components
ER Collets · ER Nuts · Cutting Tools
Nut Types
A Type / M Type / UM Type
Main Applications
Deep Cavity Machining · Long-Reach Milling · Limited-Space Machining · Slot Machining
Ounuowei provides comprehensive CNC tooling solutions and support services. All products are meticulously researched, designed, and manufactured in strict compliance with international standards, including GB, ISO, DIN, ANSI, and JIS.
Contact Us
Let's grow your business
Customization Capabilities
Premium Equipment & 100% Inspection
Top-tier Equipment: Swiss STUDER/KELLENBERGER, Mazak 5-axis, OKAMOTO.
100% Full Inspection: Strict testing with Mitutoyo, HAIMER & ZOLLER.
Reliable Quality & Business Credit
Strict ISO 9001 standards & advanced ERP system for seamless control.
Dun & Bradstreet registered & CCPIT certified for reliable business credit.
Expert R&D & Customization
Experience: 20+ years of expertise in CNC tools.
Service: Full in-house R&D supporting OEM/ODM & non-standard customization.
Support: Professional pre-sales & comprehensive after-sales service.